top of page

Enersine Monolithic

100 & 150 A

Maximum active harmonics and power factor compensation.

Ablerex Active Power Filters (APF) in monolithic topology is the best solution to compensate variable power factor and harmonics. With high current ratings from 100A to 150A, they are adapted to any load size for maximum versatility of use.

Enersine Monolithic_edited.png
Enersine monolithic Inside.png
Features: 
  • 3 level converter based on multi DSP control technology

  • Space-saving high power density design

  • The same model applies 3 Phase 3 Wires/ 4 Wires System

  • Can work in closed or open loop

  • Compensate up to 51st harmonics with a response time of less than 1ms

  • Selective mode - Choice of the harmonics to compensate

  • Power Factor Correction

  • Correct unbalanced three-phase utility

  • No overload effects

  • Advanced operations interface: 7” Color LCD Touch Screen to set all system’s parameters and read the 500 lines log file

  • SD card to download log file, records waveform and parameter

  • Display voltage/current waveform, parameter and frequency spectrum

  • Multiple languages

  • Customizable LCD SW with logo

  • Complete standard communication: 3x output and 1x input dry contact, RS485 Modbus, Ethernet, settable e-mail alarm

Open / Close Loop control
User-friendly HMI
EnersineMonolithic-Leaflet-02.png

The 7” color touch screen display of the APF lets you set all the parameters, read the log file, download data to a removable SD card. It can also show voltage and current waveforms, before and after the APF activation, together with the frequency spectrum through a barograph. It can be personalized with different logo and languages.

EnersineMonolithic-Screen-03.png
TRUE HARMONIC & POWER FACTOR CORRECTION

Ablerex APF not only compensates harmonic current but also improves the power factor. It will also correct for either a leading or lagging power factor. Enersine can compensate harmonics up to order 51st in less than 1ms.

EnersineMonolithic-harmonic-04.png

Before

THDi% = 30%, PF = 0.81

After

THDi% = 4.3%, PF = 1.0

bottom of page