Enersine Monolithic

100 & 150 A

Maximum active harmonics and power factor compensation.

Ablerex Active Power Filters (APF) in monolithic topology is the best solution to compensate variable power factor and harmonics. With high current ratings from 100A to 150A, they are adapted to any load size for maximum versatility of use.

Download PDF

Features:

3 level converter based on multi DSP control technology
Space-saving high power density design
The same model applies 3 Phase 3 Wires/ 4 Wires System
Can work in closed or open loop
Compensate up to 51st harmonics with a response time of less than 1ms
Selective mode - Choice of the harmonics to compensate
Power Factor Correction
Correct unbalanced three-phase utility
No overload effects
Advanced operations interface: 7” Color LCD Touch Screen to set all system’s parameters and read the 500 lines log ﬁle
SD card to download log ﬁle, records waveform and parameter
Display voltage/current waveform, parameter and frequency spectrum
Multiple languages
Customizable LCD SW with logo
Complete standard communication: 3x output and 1x input dry contact, RS485 Modbus, Ethernet, settable e-mail alarm

Open / Close Loop control

User-friendly HMI

The 7” color touch screen display of the APF lets you set all the parameters, read the log ﬁle, download data to a removable SD card. It can also show voltage and current waveforms, before and after the APF activation, together with the frequency spectrum through a barograph. It can be personalized with different logo and languages.

TRUE HARMONIC & POWER FACTOR CORRECTION

Ablerex APF not only compensates harmonic current but also improves the power factor. It will also correct for either a leading or lagging power factor. Enersine can compensate harmonics up to order 51st in less than 1ms.

Before

THDi% = 30%, PF = 0.81

After

THDi% = 4.3%, PF = 1.0